How to Change Input on Sceptre Monitors? Fix No Signal Errors

How-to-Change-Input-Sceptre-Monitors

Switching the input on a monitor is a common task that is often necessary when using a computer or other device. Whether you’re connecting a laptop to a desktop monitor, or a gaming console to a TV, changing the input on the monitor is an essential step in the process.

In this article, we will explain how to change the input on Sceptre monitors and provide some tips for ensuring a successful connection. Whether you’re using a traditional CRT monitor or a modern LCD display, the process is similar and can be easily accomplished by following a few simple steps.


Jump To

  1. Steps To Change Input
  2. Fix No Signal Message
  3. How To Factory Reset

Steps To Change Input on Sceptre Monitors

Changing the input on a Sceptre monitor is a simple process that can be done in just a few steps. Whether you’re switching from HDMI to VGA, or from DVI to DisplayPort, the process is the same. Here’s how to do it:

  1. Turn off your computer and monitor. This is an important step to avoid any potential damage to your equipment.
  2. Locate the input selector button on the monitor. This is typically a small button labeled “Input” or “Source” that is located on the front or side of the monitor.
  3. Press the input selector button until the desired input is selected. The screen will briefly go blank as the monitor switches to the new input.
  4. Turn on your computer and check that the new input is working properly. If you’re using a cable to connect the computer to the monitor, make sure it is securely connected at both ends.
  5. If you’re still having trouble getting the new input to work, try restarting both the computer and the monitor. In some cases, this can resolve any issues that may be preventing the new input from functioning properly.

Sceptre Monitor Showing No Signal Message

If you’re using a Sceptre monitor and are experiencing a “no signal check you input” error message or monitor turning on and off, there are a few possible causes and solutions to try. This can be a frustrating issue, but it is often relatively easy to resolve.

Here are some steps to take if you’re seeing a “no signal” message on your Sceptre monitor:

1. Check the Connection

Check the connection between your computer and the monitor. Make sure that the cable is securely connected at both ends and that there are no loose or damaged wires. If you’re using a VGA cable, check that the pins are straight and not bent or broken.

2. Try Using a Different Cable

Try a different cable. If you’re using a VGA or DVI cable, try switching to a different type of cable such as HDMI or DisplayPort. This can sometimes resolve the issue if the original cable is damaged or not functioning properly.

3. Restart Your Monitor & PC

Sometimes, a simple restart can resolve a “no signal” error message. Shut down your computer, unplug the monitor, wait a few minutes, and then restart both the computer and the monitor.

4. Check the Monitor Settings

If you’re still seeing the “no signal” message, try adjusting the settings on the monitor. Look for an option to manually select the input source, and make sure it is set to the correct input (e.g. HDMI, VGA, DVI, etc.).

5. Update Drivers For the Monitor

If you’re using a Windows computer, try updating the drivers for the monitor. This can sometimes resolve issues with the display and improve the overall performance of the monitor.

6. Check For Damage

Check for damage. If you’ve tried all of the above steps and are still experiencing a “no signal” error message, there may be a hardware issue with the monitor. Check for any visible damage to the cables or the monitor itself, and contact Sceptre customer support if necessary.

In most cases, the “no signal” error message on a Sceptre monitor can be easily resolved by following the steps outlined above.


Last Thing You Can Do is Factory Reset

If you’re experiencing issues with your Sceptre monitor, one possible solution is to reset it from the on-screen display (OSD) menu. This can restore the monitor to its default settings and resolve a variety of problems, including display and input issues.

Here’s how to reset a Sceptre monitor from the OSD menu:

  1. Press the menu button on the monitor. This is typically a small button labeled “Menu” or “OSD” that is located on the front or side of the monitor.
  2. Use the arrow keys on the monitor to navigate to the “Factory Reset” option in the menu. This may be located under a section labeled “System” or “Settings”.
  3. Press the “Enter” or “OK” button to select the “Factory Reset” option. The monitor will display a warning message asking if you are sure you want to reset the monitor.
  4. Press the “Enter” or “OK” button again to confirm the reset. The monitor will go through a series of self-tests and then display the default settings.
  5. Once the reset process is complete, turn on your computer and check that the monitor is functioning properly. If you’re still experiencing issues, try restarting both the computer and the monitor.

That’s all there is to it! With just a few simple steps, you can easily reset your Sceptre monitor from the OSD menu and restore it to its default settings. This can often resolve a variety of issues and improve the overall performance of the monitor.

That’s a Wrap!

That’s all there is to it! With just a few simple steps, you can easily change the input on your Sceptre monitor whenever you need to. Whether you’re using a different computer, a different cable, or a different type of device, the process is the same.

So next time you need to switch inputs, you’ll know exactly what to do.

Total
4
Shares
Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts